Yes. Our steel garage prices include delivery and installation on your level land in Alabama, Arkansas, Colorado, the District of Columbia, Florida, Georgia, Illinois, Indiana, Kansas, Kentucky, Louisiana, Maryland, Mississippi, Missouri, New Jersey, New Mexico, New York, North Carolina, Ohio, Oklahoma, Pennsylvania, South Carolina, Tennessee, Texas, Virginia, and West Virginia. We deliver and set up your sturdy metal garage so you can start enjoying it right away!
There are three types of RV carports – regular roof, a-frame roof, and vertical roof. We provide you with the choice of roof style and wall panel style, all depending on your personal preferences. You are also given the options of a roof-only carport, a carport with panels or a fully-enclosed garage. Your customization options range from the regular style roof (good) to boxed-eave style roof (better) to vertical style (best) that doesn’t allow anything to settle on your paneling. Our RV carports can be built starting at 12′ wide going up to 60’ wide; however, you need to keep in mind that your RV carport cannot be built taller than the width.
Choice Metal Buildings offers a full range of custom metal buildings in NC and throughout the USA. Our selection includes metal garages, carports, barns, storage sheds, and other steel buildings. When it comes to metal and steel building installation, there's no better partner than the friendly specialists at Choice Metal Buildings. Rely on us for full-customizable steel and metal buildings nationwide.
When you order one of our metal RV covers, you get a choice of three roof styles: regular, boxed eave, and vertical. There is an advantage to choosing a vertical roof for your RV: Metal carports with this type of roof don’t experience snow buildup. Because of the roof’s vertical sheeting, the snow slides off the side before it can accumulate. The regular and boxed-eave styles have sheeting that runs horizontally across the length of the building.

The regular-style roof is rounded on the sides with a barn-like shape. This is the most economical option for a metal building roof. The leg height on the regular garage packages is 8 feet, but at the top of the bend on the leg, it is 1 foot taller. This gives you 9-foot legs with a 9x8 garage door. The boxed-eave and vertical metal building packages come standard with 9-foot legs fully enclosed with a 9x8 garage door. The metal buildings for sale that have a boxed-eave roof have an A-frame gable roof with a 6-inch overhang on both sides. The vertical style is also built with an A-frame roof and has a 6-inch overhang on both sides. All of our steel buildings for sale have a 6-inch overhang on the front and back ends. The sheeting on a vertical-style roof runs up and down, allowing the snow to slide off of the building so you won’t have to rake the roof. Also, there’s bracing attached under a vertical roof to secure the sheeting. This adds strength to the structure of a vertical garage. When you look at the boxed-eave and regular roofs, you’ll notice that the sheeting runs horizontally over the length of the roof.
Our metal garages have passed the most rigorous tests by branches of the US military for strength and durability. Our buildings are in use by many fire departments, police departments, commercial companies and municipalities. Private, commercial, and government agencies from California to Vermont, from the Appalachians to Alaska, and from Iraq to Poland have become satisfied customers of our building kits.
Are you looking for a large storage space for equipment, vehicles, tools, or other substantial items? You could rent a storage locker, but they can be expensive, and you’d have to get into the car and drive to the storage facility every time you needed to retrieve something. Our prefab steel buildings are a much more convenient and cost-effective option: Buy one of our steel building kits and you’ll get the space you need with no monthly rental fees required!

Yes. There are a wide variety of sizes available for our custom metal buildings. They can be 12 feet, 18 feet, 20 feet, 22 feet, or 24 feet wide. The triple metal buildings are built 26 feet, 28 feet, and 30 feet wide. We also have our 40-foot-wide models, which are available in lengths of 32 feet, 34 feet, 36 feet, 38 feet, and 40 feet. The lean-to is available in 36 feet, 42 feet, 44 feet, 46 feet, and 48 feet. The lean-to has 12 feet on both sides. With those models, the lengths start out at 21 feet and get longer in 5-foot increments. The available lengths include 26 feet, 31 feet, 36 feet, 41 feet, 46 feet, 51 feet, 56 feet, 61 feet, 66 feet, 71 feet, 76 feet, 81 feet, 86 feet, 91 feet, 96 feet, and 101 feet. They can be built longer than 101 feet as well. To make them longer than 41 feet, we simply attach two end to end. We recommend the vertical roof for any built 41 feet or longer.


There are three types of RV carports – regular roof, a-frame roof, and vertical roof. We provide you with the choice of roof style and wall panel style, all depending on your personal preferences. You are also given the options of a roof-only carport, a carport with panels or a fully-enclosed garage. Your customization options range from the regular style roof (good) to boxed-eave style roof (better) to vertical style (best) that doesn’t allow anything to settle on your paneling. Our RV carports can be built starting at 12′ wide going up to 60’ wide; however, you need to keep in mind that your RV carport cannot be built taller than the width.
All of our cheap steel buildings include free delivery for greater savings, and we’ll also build the structure on your property for free. Your new building will require a level surface for its foundation, though: A level gravel base or a concrete pad is recommended for all buildings we sell at Alan’s Factory Outlet. Placing your modular structure on this type of foundation gives it an extra element of sturdiness. Our prefabricated metal buildings for sale can fit a large number of existing foundations, and if you have any questions about whether your existing site will work for a new metal building, just give us a call and we’ll help you figure out the details.

Yes. There are a wide variety of sizes available for our custom metal buildings. They can be 12 feet, 18 feet, 20 feet, 22 feet, or 24 feet wide. The triple metal buildings are built 26 feet, 28 feet, and 30 feet wide. We also have our 40-foot-wide models, which are available in lengths of 32 feet, 34 feet, 36 feet, 38 feet, and 40 feet. The lean-to is available in 36 feet, 42 feet, 44 feet, 46 feet, and 48 feet. The lean-to has 12 feet on both sides. With those models, the lengths start out at 21 feet and get longer in 5-foot increments. The available lengths include 26 feet, 31 feet, 36 feet, 41 feet, 46 feet, 51 feet, 56 feet, 61 feet, 66 feet, 71 feet, 76 feet, 81 feet, 86 feet, 91 feet, 96 feet, and 101 feet. They can be built longer than 101 feet as well. To make them longer than 41 feet, we simply attach two end to end. We recommend the vertical roof for any built 41 feet or longer.
The estimated delivery time frames are not guaranteed, but approximately 90% of the time, delivery occurs within 60 days of us receiving the order at the factory. Please keep in mind that harsh winter weather conditions can make it difficult to complete an installation, so if you live in an area that experiences a lot of snow and ice, there is an increased chance that the wait time could exceed 90 days.
We have three options available for your RV cover, including our most popular option, the regular roof cover. This roof cover is ideal for areas where temperate climates and mild weather is the norm. For snowier or more wintry sections of the country, we recommend our other two types of roofs, since they are engineered to withstand more extreme conditions. The boxed eave roof has an A-frame design shelters and is made with stronger material that withstands more brutal weather than the regular roof type shelters. Our vertical roof shelters for our RVs has a vertical design that allows snow to dissipate quickly, which is recommended in areas where harsh weather is common. Work with us to determine which roof type best suits your needs.
On the Boxed Eave Style Metal RV Cover, (A-Frame Type), the RV Cover comes with the Standard Horizontal Roof. The Roof Panels run parallel to the side of the Structure. Water will drain to the front or the back of the Structure. On this style you have the option of having the roof panels installed vertically for an additional charge. We recommend the Vertical Roof Style for the small difference in price versus the Horizontal Roof Style.

You’ve invested a lot of money in your RV, so it only makes sense to pamper it like a baby by garaging it beneath a metal RV cover. An RV cover is similar to a carport and works on much the same premise – it covers your RV from the elements and protects it from the damage inflicted by full exposure to the harmful UV rays from the sun. We offer a range of different metal RV shelter for you – each of them customizable to give you the best option for your RV, ensuring your RV stays looking its best in between cross-country excursions.
At Alan’s Factory Outlet, we have RV shelters for sale made with sturdy metal sheets that wrap around the support structure to create a roof and two partial sides or a roof and one full side. Carports that are partially enclosed provide ventilation while still protecting your property. Another benefit of our partially enclosed RV carports is that you’ll have easy access to your vehicle to clean it, load it, or just climb in for a quick inspection. But if you prefer, we also have affordable RV storage that is entirely enclosed.
BEST PRICE GUARANTEE: Absolute Steel is so confident of our products and pricing that if you have any bonafide competitor’s written quote using materials of the same specifications and size that is priced less than ours, we will match that pricing AND REDUCE IT BY 5%. Simply submit that written quote to us along with a copy of your Absolute Steel quote.
Do you have master plans for taking over your backyard? This guide to creating a she-shed will help you design your very own feminine backyard retreat. She-sheds are in vogue at the moment, with so many cute and gorgeous options to make your outdoor spot a bit more tranquil. Shove aside the power tools and bring in the hammocks! Make over a normal shed and build your own DIY she-shed with these tips. These are some of the current she-shed styles out there, so go with the fashion or create something just for you!

A metal RV carport from Alan’s Factory Outlet is easy to set up and protects your vehicle from damage caused by harsh weather conditions with sturdy covered RV storage. Many of our RV carports for sale have a roof with one or two walls to form an effective RV canopy; the differences in design depend on the specific model. But no matter how you customize yours, our RV storage buildings can offer something unique to your property.
You love the open road, traveling, exploring new places, and you do it all in your second home, your RV. After the adventure has come to an end, what do you do with your second home? Many people pay extravagant fees to store their motor coach at a storage facility far from their homes, making it inconvenient to visit, work on, or enjoy on a whim. The sentiment is understandable; I paid a lot for my RV, I want to keep it safe from the elements. But what if you could keep your RV close to home while also keeping it sheltered and protected? That’s where Elephant Structures comes in. For those weeks and months spent at home, our RV, 5th wheel and motor coach cover will serve as a safeguard for your home away from home, providing the protection you would expect from a storage facility with the convenience and luxury of proximity to your home!
One way our building system significantly reduces project costs is by decreasing construction timelines. In fact, our buildings can save you up to 50% compared to the cost of traditional construction. We deliver these savings by prefabricating the building which means that all of the welding is done at the factory prior to delivery and all of your framed openings for windows, doors and even skylights are pre-punched before arriving at your job site.
×