ABSOLUTE STEEL RV covers and shade ports are available in widths up to 40′ wide; standard lengths start at 20′ and increase in 4’or 5′ increments until you run out of land. Our carports are offered in standard heights starting at an eave height of 7.5′ and can be increased in 1′ increments up to a 15.5′ eave height. A 15.5′ eave height can give you clearance of 15′-4″ on a 40′ wide garage!
The RV carport prices listed on the Carport Direct website are for a partially covered RV car port building. The prices for these RV covers include 13′ Walls, 14 Gauge Frame, One Center Brace on Every Bow, One 3′ Brace on Every Leg, Concrete or Ground Anchors, Bows/Legs 5′ On Center, & One Panel Down Each Side with J-trim for Strength & Stability. From the customization panel on Carport Direct, you can design a custom configuration according to your needs & specifications specific widths & lengths (more options available just call us), leg height, certification, and more. You can opt for the thicker 12 GA framing, add more garage doors, windows, walk-in doors, framed openings, and choose from a wide list of 14 color options. Carport Direct has conveniently priced a wide selection of Standard Steel RV covers in sizes from 12’ to 24’ wide, & from 26’ to 51’ long, which are suitable for most of our customers. We offer these standard sizes to save you time & money. We can build any custom size in between these sizes. Any custom size is priced the same as the next size up. I.e. a 16′ wide is priced the same as a 18′ wide, a 29′ long would be priced the same as a 31′ long. We also offer a variety of options with our Metal RV Covers. You should consider purchasing additional panels down the open sides to keep the blowing rain off of your RV or equipment. We also offer additional bracing, ground installation anchors for wind certification if not anchored to concrete, & 12 Gauge frame for higher wind & snow load. Additional height is available for the legs, up to 16′ high. We also offer a variety of options with our Metal RV Covers. You should consider purchasing additional panels down the open sides to keep the blowing rain off of your RV or equipment. We also offer additional bracing, ground installation anchors for wind certification if not anchored to concrete, & 12 Gauge frame for higher wind & snow load. Additional height is available for the legs, up to 12′ high.
Yes. There are a wide variety of sizes available for our custom metal buildings. They can be 12 feet, 18 feet, 20 feet, 22 feet, or 24 feet wide. The triple metal buildings are built 26 feet, 28 feet, and 30 feet wide. We also have our 40-foot-wide models, which are available in lengths of 32 feet, 34 feet, 36 feet, 38 feet, and 40 feet. The lean-to is available in 36 feet, 42 feet, 44 feet, 46 feet, and 48 feet. The lean-to has 12 feet on both sides. With those models, the lengths start out at 21 feet and get longer in 5-foot increments. The available lengths include 26 feet, 31 feet, 36 feet, 41 feet, 46 feet, 51 feet, 56 feet, 61 feet, 66 feet, 71 feet, 76 feet, 81 feet, 86 feet, 91 feet, 96 feet, and 101 feet. They can be built longer than 101 feet as well. To make them longer than 41 feet, we simply attach two end to end. We recommend the vertical roof for any built 41 feet or longer.
Alabama Alaska Arizona Arkansas California Colorado Connecticut Delaware District of Columbia Florida Georgia Hawaii Idaho Illinois Indiana Iowa Kansas Kentucky Louisiana Maine Maryland Massachusetts Michigan Minnesota Mississippi Missouri Montana Nebraska Nevada New Hampshire New Jersey New Mexico New York North Carolina North Dakota Ohio Oklahoma Oregon Pennsylvania Rhode Island South Carolina South Dakota Tennessee Texas Utah Vermont Virginia Washington West Virginia Wisconsin Wyoming
When you order one of our metal RV covers, you get a choice of three roof styles: regular, boxed eave, and vertical. There is an advantage to choosing a vertical roof for your RV: Metal carports with this type of roof don’t experience snow buildup. Because of the roof’s vertical sheeting, the snow slides off the side before it can accumulate. The regular and boxed-eave styles have sheeting that runs horizontally across the length of the building.
Yes, we have a wide variety of sizes available for both our steel and metal garages. They can be 12 feet, 18 feet, 20 feet, 22 feet, or 24 feet wide. The triple-steel garages are built in 26-foot, 28-foot, and 30-foot widths. We also have 40-foot-wide models, available in lengths of 32 feet, 34 feet, 36 feet, 38 feet, and 40 feet. The lean-to model comes in 36 feet, 42 feet, 44 feet, 46 feet, and 48 feet. It has 12 feet on both sides of the building. The lengths start at 21 feet and get longer in 5-foot increments: 26 feet, 31 feet, 36 feet, 41 feet, 46 feet, 51 feet, 56 feet, 61 feet, 66 feet, 71 feet, 76 feet, 81 feet, 86 feet, 91 feet, 96 feet, and 101 feet. To make them longer than 41 feet, we attach two of our steel garages end to end; they can be built longer than 101 feet. We recommend the vertical roof for any garage built 41 feet or longer.
Modular: A modular building is a structure where the materials are designed and fabricated offsite and then transported to the project location where each part is assembled. Many businesses may choose this method as it allows a larger building to be built more quickly than a traditional building given the parts have already been cut and designed to the proper specs. For the same reasons, it is also an efficient way to build a home.
Delivery of these structures usually occurs within 60 days of the order being received by the factory, and it’s often a lot sooner than that. If your carport or metal garage delivery takes more than 90 days, we offer a 10% discount on the balance due upon request. (However, installations/deliveries in DC, IN, MD, NJ, NY, OH, PA, and WV are likely to be delayed in the winter months, so we do not offer the 90-day guarantee in these areas from Oct. 1 through spring.)
We design our metal RV covers to protect your investment. Metal RV covers may be enclosed for a fully protected garage or open as with a carport. Metal RV covers may be customized with storage areas, skylights, windows and rollup doors,overhead doors and man doors. Our metal RV covers come in any width up to 80' wide clearspan and as long or as tall as you want. From your ATV to your King size RV, motor home, trailer or boat, we've got you covered! Snow, ice, rain, wind, sunshine and other external threats will no longer be a problem with our metal RV covers. Please see our estimator page for pricing and colors.
Metal garage doors can be placed on the end or on the gutter side like in this picture. Please keep in mind that if you order metal garage kits with the garage doors on the side, the leg height needs to be 2 feet taller than the height of the garage door; when you get the garage doors on the end, the leg height only needs to be 1 foot taller than the height of the garage doors. Also, steel garages come standard with 29-gauge metal siding going horizontal, but you have the option to upgrade to vertical sides and a vertical roof as shown in the picture.
Did you know that adding a high-quality metal garage building to your property could increase the value of your home? One study conducted by Florida State University concluded that the addition of a new garage could add as much as 13% to your home value. Of course, as is true with any home improvement project, the quality of the garage building will go a long way in determining what sort of equity gains you will realize over time.
Selecting an RV cover is a good step towards protecting your vehicle, and the hardest part of your purchasing decision is choosing which RV cover is right for you. Our specialists are standing by to help you make an informed decision, based on your needs and the regulations in your area as well as the weather conditions that prevail in your location. Our trained sales team is adept at helping our clients choose the right roof type, gauge, and other features of their RV covers, so we’re confident that the metal RV shelter you order is one that fulfills the needs you have.
The regular-style roof is rounded on the sides with a barn-like shape. This is the most economical option for a metal building roof. The leg height on the regular garage packages is 8 feet, but at the top of the bend on the leg, it is 1 foot taller. This gives you 9-foot legs with a 9x8 garage door. The boxed-eave and vertical metal building packages come standard with 9-foot legs fully enclosed with a 9x8 garage door. The metal buildings for sale that have a boxed-eave roof have an A-frame gable roof with a 6-inch overhang on both sides. The vertical style is also built with an A-frame roof and has a 6-inch overhang on both sides. All of our steel buildings for sale have a 6-inch overhang on the front and back ends. The sheeting on a vertical-style roof runs up and down, allowing the snow to slide off of the building so you won’t have to rake the roof. Also, there’s bracing attached under a vertical roof to secure the sheeting. This adds strength to the structure of a vertical garage. When you look at the boxed-eave and regular roofs, you’ll notice that the sheeting runs horizontally over the length of the roof.