ABSOLUTE STEEL RV covers and shade ports are available in widths up to 40′ wide; standard lengths start at 20′ and increase in 4’or 5′ increments until you run out of land. Our carports are offered in standard heights starting at an eave height of 7.5′ and can be increased in 1′ increments up to a 15.5′ eave height. A 15.5′ eave height can give you clearance of 15′-4″ on a 40′ wide garage!
The certified package is available if you live in an area where you must present blueprint drawings of your steel garage to the local building department. These drawings show that the garage is rated for up to 140-mph winds and a 30-psf snow load. The certified package is available at an additional cost depending on the size. Certified metal garages are built fully braced and include mobile home anchors if they are going to be anchored to the ground.
You can also choose from three different roof styles for our steel-frame buildings. Most regular prefab steel barns have a barn-style roof, whereas boxed-eave buildings have an A-frame roof. Other structures have an A-frame roof with vertical paneling that allows the snow to slide off. Vertical paneling is a great option for steel garage buildings if you live in an area that gets a high amount of snowfall.
ABSOLUTE STEEL metal garages are available in widths up to 40′ wide; standard lengths start at 20′ and increase in 4’or 5′ increments until you run out of land. Our metal garages are offered in standard heights starting at an eave height of 7.5′ and can be increased in 1′ increments up to a 15.5′ eave height. A 15.5′ eave height can give you clearance of 15′-4″ on a 40′ wide garage!

Yes. There are a wide variety of sizes available for our custom metal buildings. They can be 12 feet, 18 feet, 20 feet, 22 feet, or 24 feet wide. The triple metal buildings are built 26 feet, 28 feet, and 30 feet wide. We also have our 40-foot-wide models, which are available in lengths of 32 feet, 34 feet, 36 feet, 38 feet, and 40 feet. The lean-to is available in 36 feet, 42 feet, 44 feet, 46 feet, and 48 feet. The lean-to has 12 feet on both sides. With those models, the lengths start out at 21 feet and get longer in 5-foot increments. The available lengths include 26 feet, 31 feet, 36 feet, 41 feet, 46 feet, 51 feet, 56 feet, 61 feet, 66 feet, 71 feet, 76 feet, 81 feet, 86 feet, 91 feet, 96 feet, and 101 feet. They can be built longer than 101 feet as well. To make them longer than 41 feet, we simply attach two end to end. We recommend the vertical roof for any built 41 feet or longer.

Around the world there are many famous and amazing monuments, structures and buildings. Many of these structures have withstood the test of time and have endured from as far back as ancient times. These are often open to tourists who will appreciate the skill of these early architects and engineers. Other, newer buildings, are also appreciated for their design and engineering. From the United States to Asia, travelers and people who are curious about history can appreciate these works of artistic design and ingenuity.


You can also choose from three different roof styles for our steel-frame buildings. Most regular prefab steel barns have a barn-style roof, whereas boxed-eave buildings have an A-frame roof. Other structures have an A-frame roof with vertical paneling that allows the snow to slide off. Vertical paneling is a great option for steel garage buildings if you live in an area that gets a high amount of snowfall.
Motorhomes and recreational vehicles serve as a second home, deserving the highest level of protection. Constructed with 26- or 29-gauge steel sheeting and 12- or 14-gauge steel tubing, our covers included warranties up to 40 years – a lifetime of protection. Since RVs are as varied as their owners, ProBuilt can deliver a wide range of steel motorhome covers to suit your needs, or design a custom structure just for you. If you can drive it, we can protect it.
We offer standard sizes to save you time & money. They are priced 12' wide, 18' wide, 20' wide, 22' wide, & 24' wide, & in lengths they are priced 26' long, 31' long, 36'' long, & 41' long. We can build any custom size in between these sizes. Any custom size is priced the same as the next size up. I.e. a 14' 0" wide is priced the same as a 18' wide, a 34' long would be priced the same as a 36' long, etc..
Working with General Steel is a collaborative process that ensures that your final product reflects your specific needs. The process starts with a two-way conversation between you and our experienced team. We want to know exactly how you will be using your garage, how it will fit on your property, and your ideas for interior and exterior design, among other factors. We then research the location of the garage to ensure that it’s equipped to withstand the wind and snow loads of your area as well as any insulation requirements.
Purchasing your RV carports and metal RV covers from Absolute Steel assures you that we not only manufacture the best on the market, but that we know all about the subtle issues of storing your RV properly such as clearance heights on the different models, proper widths depending your storage purposes, and just about any other question that might come up.
We ship nationwide directly to you or your job site. Our prices include FREE JOB SITE DELIVERY except to AZ, AK, & HI. Alaska and Hawaii shipping is calculated by individual quote. Arizona has customer yard pickup available, but individual shipping can be calculated. Your steel garage frame kit will be shipped directly from us via common carrier. In most cases the exterior panels and trim will be shipped from the panel supplier in our network that is closest to your job site location. We have an extensive nationwide database of suppliers for your paneling and reduced shipping is another reason we are able to provide lower prices.
ABSOLUTE STEEL RV covers and shade ports are available in widths up to 40′ wide; standard lengths start at 20′ and increase in 4’or 5′ increments until you run out of land. Our carports are offered in standard heights starting at an eave height of 7.5′ and can be increased in 1′ increments up to a 15.5′ eave height. A 15.5′ eave height can give you clearance of 15′-4″ on a 40′ wide garage!

A garage can be used as protection from theft, infestations, or harsh weather at a price that won’t break the bank. However, garages aren’t just for peace of mind about your home security; they can have many different uses. For example, our custom metal garage buildings can be used as nice and cozy guesthouses when relatives visit or maybe a cabana for your poolside needs! A garage can also be turned into a man-cave, she-shed, or just a small space to get away from life’s hustle and bustle. We’d love to hear your ideas on how we can build and customize a garage that will fit all your needs, you can contact us at (844) 860-4950 to get started!


If you’re not looking for a fully enclosed portable metal garage, then a metal carport may be the way to go. Metal carports may be left open or partially enclosed, and they are usually very basic in structure, so they’re usually less expensive than metal garages. Triple carports, metal barn lean-to buildings, and 40-foot steel garages are also available options.
Delivery of these structures usually occurs within 60 days of the order being received by the factory, and it’s often a lot sooner than that. If your carport or metal garage delivery takes more than 90 days, we offer a 10% discount on the balance due upon request. (However, installations/deliveries in DC, IN, MD, NJ, NY, OH, PA, and WV are likely to be delayed in the winter months, so we do not offer the 90-day guarantee in these areas from Oct. 1 through spring.)
One of the most popular forms of travel used today is taking an RV cross-country! Travelling in an RV is an experience that not many people get to experience, and if you have, one that you don’t want to miss! In the 60’s and 70’s, vans were the way for a family or group of friends to travel in style and comfort; since then, RV manufacturers have built vehicles with more power, efficiency, and of course, comfort. An RV provides the comforts of home in a versatile vehicle that can be taken just about anywhere. There are plenty of parks and campgrounds across the U.S. to choose from, along with those in other countries if you’re ready for an adventure!
Are you looking for a large storage space for equipment, vehicles, tools, or other substantial items? You could rent a storage locker, but they can be expensive, and you’d have to get into the car and drive to the storage facility every time you needed to retrieve something. Our prefab steel buildings are a much more convenient and cost-effective option: Buy one of our steel building kits and you’ll get the space you need with no monthly rental fees required!

The RV carport prices listed on the Carport Direct website are for a partially covered RV car port building. The prices for these RV covers include 13′ Walls, 14 Gauge Frame, One Center Brace on Every Bow, One 3′ Brace on Every Leg, Concrete or Ground Anchors, Bows/Legs 5′ On Center, & One Panel Down Each Side with J-trim for Strength & Stability. From the customization panel on Carport Direct, you can design a custom configuration according to your needs & specifications specific widths & lengths (more options available just call us), leg height, certification, and more. You can opt for the thicker 12 GA framing, add more garage doors, windows, walk-in doors, framed openings, and choose from a wide list of 14 color options. Carport Direct has conveniently priced a wide selection of Standard Steel RV covers in sizes from 12’ to 24’ wide, & from 26’ to 51’ long, which are suitable for most of our customers. We offer these standard sizes to save you time & money. We can build any custom size in between these sizes. Any custom size is priced the same as the next size up. I.e. a 16′ wide is priced the same as a 18′ wide, a 29′ long would be priced the same as a 31′ long. We also offer a variety of options with our Metal RV Covers. You should consider purchasing additional panels down the open sides to keep the blowing rain off of your RV or equipment. We also offer additional bracing, ground installation anchors for wind certification if not anchored to concrete, & 12 Gauge frame for higher wind & snow load. Additional height is available for the legs, up to 16′ high. We also offer a variety of options with our Metal RV Covers. You should consider purchasing additional panels down the open sides to keep the blowing rain off of your RV or equipment. We also offer additional bracing, ground installation anchors for wind certification if not anchored to concrete, & 12 Gauge frame for higher wind & snow load. Additional height is available for the legs, up to 12′ high.
Finish your custom steel structure with something sturdy that can stand against the elements. All roof styles can be certified for structural integrity but finding the right type for your climate and need is important. We have a wide variety of metal buildings for sale with many customization options. You can call us today at (844) 860-4950 to speak with one of our friendly building specialists to learn more about roof types and which best fits your needs.
ShelterCoat garages are the ideal compact storage solution ShelterCoat garages are the ideal compact storage solution for ATV's lawn and garden equipment small tractors patio furniture pool supplies tools and equipment and bulk storage. Choose from the largest selection of premium powder-coated steel frame fabric shelters in the industry With THOUSANDS of choices we have a shelter to ...  More + Product Details Close
We do not allow you to pick up steel garages from our warehouse. However, we do offer the option of having steel garage buildings dropped off at your home so you can assemble them. We prefer to deliver and set up our garage structures, but if you’d like to assemble yours yourself, you can. Although you will save 5% on the purchase price when you assemble your own metal garage, installing the garage yourself does void our one-year workmanship warranty.

When you order one of our metal RV covers, you get a choice of three roof styles: regular, boxed eave, and vertical. There is an advantage to choosing a vertical roof for your RV: Metal carports with this type of roof don’t experience snow buildup. Because of the roof’s vertical sheeting, the snow slides off the side before it can accumulate. The regular and boxed-eave styles have sheeting that runs horizontally across the length of the building.
At Alan’s Factory Outlet, we have RV shelters for sale made with sturdy metal sheets that wrap around the support structure to create a roof and two partial sides or a roof and one full side. Carports that are partially enclosed provide ventilation while still protecting your property. Another benefit of our partially enclosed RV carports is that you’ll have easy access to your vehicle to clean it, load it, or just climb in for a quick inspection. But if you prefer, we also have affordable RV storage that is entirely enclosed.
Metal garage doors can be placed on the end or on the gutter side like in this picture. Please keep in mind that if you order metal garage kits with the garage doors on the side, the leg height needs to be 2 feet taller than the height of the garage door; when you get the garage doors on the end, the leg height only needs to be 1 foot taller than the height of the garage doors. Also, steel garages come standard with 29-gauge metal siding going horizontal, but you have the option to upgrade to vertical sides and a vertical roof as shown in the picture.
Motorhomes and recreational vehicles serve as a second home, deserving the highest level of protection. Constructed with 26- or 29-gauge steel sheeting and 12- or 14-gauge steel tubing, our covers included warranties up to 40 years – a lifetime of protection. Since RVs are as varied as their owners, ProBuilt can deliver a wide range of steel motorhome covers to suit your needs, or design a custom structure just for you. If you can drive it, we can protect it.
The regular-style roof is rounded on the sides with a barn-like shape. This is the most economical option for a metal building roof. The leg height on the regular garage packages is 8 feet, but at the top of the bend on the leg, it is 1 foot taller. This gives you 9-foot legs with a 9x8 garage door. The boxed-eave and vertical metal building packages come standard with 9-foot legs fully enclosed with a 9x8 garage door. The metal buildings for sale that have a boxed-eave roof have an A-frame gable roof with a 6-inch overhang on both sides. The vertical style is also built with an A-frame roof and has a 6-inch overhang on both sides. All of our steel buildings for sale have a 6-inch overhang on the front and back ends. The sheeting on a vertical-style roof runs up and down, allowing the snow to slide off of the building so you won’t have to rake the roof. Also, there’s bracing attached under a vertical roof to secure the sheeting. This adds strength to the structure of a vertical garage. When you look at the boxed-eave and regular roofs, you’ll notice that the sheeting runs horizontally over the length of the roof.
×