Working with General Steel is a collaborative process that ensures that your final product reflects your specific needs. The process starts with a two-way conversation between you and our experienced team. We want to know exactly how you will be using your garage, how it will fit on your property, and your ideas for interior and exterior design, among other factors. We then research the location of the garage to ensure that it’s equipped to withstand the wind and snow loads of your area as well as any insulation requirements.
One way our building system significantly reduces project costs is by decreasing construction timelines. In fact, our buildings can save you up to 50% compared to the cost of traditional construction. We deliver these savings by prefabricating the building which means that all of the welding is done at the factory prior to delivery and all of your framed openings for windows, doors and even skylights are pre-punched before arriving at your job site.
Look at the top of a regular-roof garage and you’ll see a barn-shaped roof with rounded sides. It is the most economical type of metal garage. The leg height on regular garage packages is 8 feet, but at the top of the bend on the leg, you have an additional foot, giving you 9-foot legs with a 9-by-8 garage door. The boxed-eave and vertical-roof metal garage packages come standard with 9-foot legs fully enclosed with a 9-by-8 garage door. The boxed-eave style has an A-frame gable roof with a 6-inch overhang on both sides. The vertical style is also built with an A-frame roof and has a 6-inch overhang on both sides. All of the steel structures have a 6-inch overhang on the front and back ends. There is one main difference between the vertical- and the boxed-eave-style roofs. On the vertical-style, the roof sheeting runs up and down, allowing snow to slide off the side of the garage structure. On the boxed-eave as well as the regular roof style, the metal sheeting runs lengthwise. Also, the bracing on the vertical sheeting is attached under the roof, which brings an extra element of strength to a vertical-roof garage.
At Alan’s Factory Outlet, we have RV shelters for sale made with sturdy metal sheets that wrap around the support structure to create a roof and two partial sides or a roof and one full side. Carports that are partially enclosed provide ventilation while still protecting your property. Another benefit of our partially enclosed RV carports is that you’ll have easy access to your vehicle to clean it, load it, or just climb in for a quick inspection. But if you prefer, we also have affordable RV storage that is entirely enclosed.

With a full range of custom metal garages and 100% free delivery and installation nationwide, Choice Metal Buildings is your source for steel garages of all sizes and layouts. We have an in-house design team who will be happy to help you tailor the design of your custom metal garage to look and function exactly as you need, so you can be sure you’re getting the perfect custom steel garage. Rely on Choice Metal Buildings for your custom metal garage, and we’ll become your valued partner for many years to come.


If you’re not looking for a fully enclosed portable metal garage, then a metal carport may be the way to go. Metal carports may be left open or partially enclosed, and they are usually very basic in structure, so they’re usually less expensive than metal garages. Triple carports, metal barn lean-to buildings, and 40-foot steel garages are also available options.
Look at the top of a regular-roof garage and you’ll see a barn-shaped roof with rounded sides. It is the most economical type of metal garage. The leg height on regular garage packages is 8 feet, but at the top of the bend on the leg, you have an additional foot, giving you 9-foot legs with a 9-by-8 garage door. The boxed-eave and vertical-roof metal garage packages come standard with 9-foot legs fully enclosed with a 9-by-8 garage door. The boxed-eave style has an A-frame gable roof with a 6-inch overhang on both sides. The vertical style is also built with an A-frame roof and has a 6-inch overhang on both sides. All of the steel structures have a 6-inch overhang on the front and back ends. There is one main difference between the vertical- and the boxed-eave-style roofs. On the vertical-style, the roof sheeting runs up and down, allowing snow to slide off the side of the garage structure. On the boxed-eave as well as the regular roof style, the metal sheeting runs lengthwise. Also, the bracing on the vertical sheeting is attached under the roof, which brings an extra element of strength to a vertical-roof garage.
Do you have master plans for taking over your backyard? This guide to creating a she-shed will help you design your very own feminine backyard retreat. She-sheds are in vogue at the moment, with so many cute and gorgeous options to make your outdoor spot a bit more tranquil. Shove aside the power tools and bring in the hammocks! Make over a normal shed and build your own DIY she-shed with these tips. These are some of the current she-shed styles out there, so go with the fashion or create something just for you!

Many states & cities require building certification. We can install this Boxed Eave Style Metal RV Cover With Horizontal Roof on your level ground or existing concrete slab. Certified up to 140 MPH Wind Speed & 35 PSF Snow Load with the Standard 14 Gauge Steel Frame. We offer up to 65 PSF Snow Load Certification in any state we service for an additional charge if needed. Comes with a 90 Day Workmanship Warranty on Installation.


All of our cheap steel buildings include free delivery for greater savings, and we’ll also build the structure on your property for free. Your new building will require a level surface for its foundation, though: A level gravel base or a concrete pad is recommended for all buildings we sell at Alan’s Factory Outlet. Placing your modular structure on this type of foundation gives it an extra element of sturdiness. Our prefabricated metal buildings for sale can fit a large number of existing foundations, and if you have any questions about whether your existing site will work for a new metal building, just give us a call and we’ll help you figure out the details.

If you wait more than 90 days for the delivery of your carport or metal garage, we will offer you a 10% discount off the balance due once the structure is installed. We can also provide a full refund of your deposit if you wish to cancel the order. However, for orders placed between Oct. 1 and spring in the District of Columbia, Indiana, Maryland, New Jersey, New York, Ohio, and Pennsylvania, this guarantee does not apply, as installations and deliveries in these locations will most likely be delayed until spring due to the frequency of winter storms.

Have you ever wondered where metal comes from, how humans figured out how to make brass, or why rose gold is just a slightly different hue? We’ve created a comprehensive chart of metals and their alloys: A list of common metal alloys like this can help us answer many questions we have about our metal tools, our everyday lives, and our universe! We’ve created a list of metal alloys and their uses, composition, and even where their metallic elements come from.
Selecting an RV cover is a good step towards protecting your vehicle, and the hardest part of your purchasing decision is choosing which RV cover is right for you. Our specialists are standing by to help you make an informed decision, based on your needs and the regulations in your area as well as the weather conditions that prevail in your location. Our trained sales team is adept at helping our clients choose the right roof type, gauge, and other features of their RV covers, so we’re confident that the metal RV shelter you order is one that fulfills the needs you have.

The regular-style roof is rounded on the sides with a barn-like shape. This is the most economical option for a metal building roof. The leg height on the regular garage packages is 8 feet, but at the top of the bend on the leg, it is 1 foot taller. This gives you 9-foot legs with a 9x8 garage door. The boxed-eave and vertical metal building packages come standard with 9-foot legs fully enclosed with a 9x8 garage door. The metal buildings for sale that have a boxed-eave roof have an A-frame gable roof with a 6-inch overhang on both sides. The vertical style is also built with an A-frame roof and has a 6-inch overhang on both sides. All of our steel buildings for sale have a 6-inch overhang on the front and back ends. The sheeting on a vertical-style roof runs up and down, allowing the snow to slide off of the building so you won’t have to rake the roof. Also, there’s bracing attached under a vertical roof to secure the sheeting. This adds strength to the structure of a vertical garage. When you look at the boxed-eave and regular roofs, you’ll notice that the sheeting runs horizontally over the length of the roof.
×